Striped Roller Blinds
Roller Blind Ordering instructions
Use our simple 4 step ordering process.
- Choose the fabric for your Roller Blind - if you haven't chosen yet, choose your striped fabric here
- We take your initial measurements, based on the illustrations opposite and the notes below (please READ)
- We call you back to confirm your measurements and take your payment during office hours (if possible at a preferred time given by you)
- Your roller blinds are made at our Chester Workshop and delivered to you
That's it!
Please complete the form below using the guide opposite and we will reply with a quotation.
All quotations received must be throroughly checked by the customer before orders are placed as we are unable to accept responsibility for incorrect measurements or information.
Notes on How to Measure for Striped Roller Blinds
The stripes will hang vertically on the blind and will be reverse rolled unless you have a fabric covered pelmet to cover the top of the blind.
Blinds may sit either inside or outside a window frame or recess
It is important that you make a decision before measuring which is the best treatment for your window.
If you have any queries please call us on 01244 336387 during office hours 10-5 mon-fri.
INSIDE A RECESS
The blind must not be obstructed so that it may hang freely when fully extended, especially look for protruding tiles, hooks, handles, pipes, skirting boards etc.
Measure the width from A to B and the drop from C to D (diagram 1). We recommend you do this in several places to allow for any slight size variation and note down the smallest measurements to the nearest millimetre.
There is no need for you to make any adjustments as we will make your blind smaller to fit into the recess.
Your Roller Blind will arrive about 5-10mm smaller, so it hangs freely and fits perfectly within the recess
OUTSIDE A RECESS
Decide how much you want to overlap the roller blind on all sides - we recommend this should be at least 50mm each side in most instances or the exact size you wish the blind to be
Carefully measure the width from E to F (diagram 2.) and the drop from G to H and note down the smallest measurements to the nearest millimetre and we will make your blind to your exact size.
In addition we need the measurement from the top of the blind down to the floor.
see Child Safety Regulations at the bottom of the page
Your Blind will be supplied on a 32mm tube with Sidewinder control which may be either on the left or right hand side of the blind in Chrome or Brass.
Maximum width for Lamimated Roller Blinds - 240 cms
LARGER WIDTH BLINDS Please note that for blinds larger than 1450 mm, the fabric will be joined. With stripes, these will not be as noticeable as plain or other patterned fabric and we will always join pieces equally on either side of the blind to make the correct width and following the pattern repeat. This may mean a considerable amount of fabric wastage for which there will be an extra charge, although we will endeavour to keep this to a minimum.
For price guide please refer to our table below - price on application for wider blinds. Please double check your results as we are unable to accept responsibility or refund for blinds that are incorrect due to inaccurate measurements received.
Roller Blind Prices - Roller Blinds from £242
AA - up to 100cm wide
- up to 180cm drop = £242
- up to 240cm drop = £285
BB - 101cm to 145cm
- up to 180cm drop = £269
- up to 240cm drop = £340
CC - 146cm to 200cm
- up to 180cm drop = £408
- up to 240cm drop = £449
DD - 201cm to 240cm
Price on application
You have chosen Foxtrot Interior Striped Fabric 150cm
How to Measure for a Roller Blind
1. Roller Blind Inside a Recess
2. Roller Blind Outside a Recess
3. Standard Striped Roller Blind with Bobble Fringe
Roller Blind Prices - Roller Blinds from £242
AA - up to 100cm wide
- up to 180cm drop = £242
- up to 240cm drop = £285
BB - 101cm to 145cm
- up to 180cm drop = £269
- up to 240cm drop = £340
CC - 146cm to 200cm
- up to 180cm drop = £408
- up to 240cm drop = £449
DD - 201cm to 240cm
Price on application
Optional Extras: Trimming from our range of pompom bobble trims on bottom edge of blind
New Child Safety Regulations : Download Child Safety Regulations
Due to new compulsory legislation regarding protection from strangulation we now need the measurement from where the top of the blind will be attached, down to the floor so the length of the operating chain can be made compliant and we can ensure new regulations are adhered to :
1. The bottom loop of the chain must be at least 150cm above the floor
2. The chain loop must be secured using the retainer supplied
3. The appropriate labels must remain attached to both the chain loop and retainer.
See our Striped Roller Blinds
See our Striped Roman Blinds
